iPhone 13 Pro Screen Repair in Manchester, CT

iPhone 13 Pro ProMotion 120Hz OLED screen replacement — a different panel from the standard 13, same physical size. The iPhone 13 Pro uses a 6.1-inch Super Retina XDR OLED with ProMotion 120Hz LTPO — the same physical size as the standard iPhone 13 but a fundamentally different display. Where the standard 13 runs a fixed 60Hz, the 13 Pro panel adapts between 10Hz and 120Hz, so the repair requires a ProMotion-rated replacement: fitting a 60Hz part built for the standard 13 caps the display at 60Hz permanently and drops ProMotion, one of the defining features of the Pro model. The 13 Pro also introduced the stainless steel frame (the standard 13 uses aluminum), which changes the chassis feel and heat path — not a factor in most screen repairs, but important if you are comparing models. When we fit a new panel we transfer the original TrueDepth ambient-light flex so True Tone, auto-brightness, and Face ID keep working. The 13-series was the first generation where a screen swap could lock Face ID, but Apple lifted that restriction in iOS 15.2, so on current firmware the repair is clean. On an older-firmware 13 Pro we update it as part of the job. Some 13 Pro users also see a persistent "Unable to verify this display is genuine" notice after a non-genuine panel — we explain exactly what that means before you collect the phone, and it does not affect Face ID or touch. Tech Genius handles iphone 13 pro screen repair for customers across Manchester, CT and nearby towns, typically while you wait.

Devices we cover: iPhone 13 Pro (6.1-inch ProMotion 120Hz OLED, stainless steel frame). The 6.7-inch 13 Pro Max is a separate repair.

Common iphone 13 pro screen repair problems we fix

Call (860) 869-1361 for a quote, or visit us in store.

iPhone 13 Pro Screen Repair — questions

Is the iPhone 13 Pro screen the same part as the standard iPhone 13?

No. Both are 6.1-inch, but the 13 Pro uses a ProMotion 120Hz LTPO OLED while the standard 13 has a fixed 60Hz panel. They are different assemblies; a 60Hz standard-13 panel in a 13 Pro permanently drops ProMotion to 60Hz — one of the features that makes the Pro worth repairing.

Why did my 13 Pro get a green or pink line down the screen?

A vertical colored line on a 13 Pro OLED is a hardware fault in the display or its ribbon connection, usually from a drop, a knock, or internal pressure from a swelling battery. It is a known fault on the 13-series OLED and is fixed by replacing the panel — no software update clears it.

Will 120Hz ProMotion still work after the screen repair?

Yes, as long as the replacement is a ProMotion-rated panel. Cheaper aftermarket screens built for the standard 13 only run at 60Hz — which is why we tell you exactly which grade you are getting before we fit anything. A part marketed as "iPhone 13 compatible" may be a 60Hz piece that fits but drops your Pro's adaptive refresh for good.

Is the 13 Pro screen the same size as the 13 Pro Max?

No — the 13 Pro is 6.1 inches and the 13 Pro Max is 6.7 inches; they use completely different assemblies. If you are not sure which model you have, Settings → General → About → Model Name shows it.

Will Face ID break if I replace the 13 Pro screen?

Not if the repair is done correctly with current firmware. Apple removed the Face ID pairing restriction for screen swaps in iOS 15.2. We transfer your original TrueDepth sensor flex and update the firmware as part of the job, so Face ID keeps working. Damaging or leaving behind that sensor flex is the usual cause of a post-repair Face ID failure at cheaper shops.

Visit Tech Genius in Manchester

Tech Genius is a walk-in repair shop at 1131 Tolland Turnpike, Manchester, CT 06042. Hours: Mon–Sat 11 AM–7 PM · Sunday Closed. No appointment needed — bring your device in or call (860) 869-1361 and we will have the part ready.

Other repairs at Tech Genius

Back to Tech Genius home